Using an SD Card
•Operations are confi rmed on the following SD cards:
Class 4 or higher compatible SD or SDHC card. Panasonic, TOSHIBA, SanDisk, ATP SD card (256 MB to 2 GB) or SDHC card (4 GB to 32 GB)
For UXP mode, use Class 6 or higher.
•If other media are used, they may fail to record data correctly, or they may lose data that had already been recorded.
•MultiMediaCards are not supported.
•Cards used to record video on this camcorder cannot be played back on other devices.
•Some card readers (including internal card readers in PCs) may not be able to support SDHC format. If you use an SDHC card for recording and encounter any reading error, the card reader you are using, might be a
•Video data may not be recorded onto the SD cards on which video data have already been recorded using the devices from other manufacturers.
Insert an SD card
Preparation:
Press Power (
) button to turn off the camcorder.
1 Open the SD card cover.
Push the cover up gently, to open it.
2 Firmly insert the card with its clipped edge first.
Clipped
Edge
3 Close the SD card cover.
To remove an SD card Push the SD card once.
After the card comes out a little, pull it out.
NOTE |
|
|
| |
• Insert and remove the SD card only while | ENGLISH | |||
the power is turned off. Otherwise, data on |
| |||
the card may be corrupted. |
| |||
• Do not touch the terminal on the reverse |
| |||
side of the label. |
| |||
GETTING STARTED | ||||
|
|
| ||
Change the recording medium |
| |||
|
| |||
|
|
| ||
The camcorder is programmed to record in |
| |||
[SLOT A] when it is shipped from the factory. |
| |||
You can change the recording medium to |
| |||
[SLOT B]. |
| |||
From the MENU.
Set [VIDEO SLOT SELECTION] and [IMAGE SLOT SELECTION] to [SLOT A] or [SLOT B].
MEDIA SETTINGS |
|
VIDEO SLOT SELECTION |
|
SLOT A |
|
IMAGE SLOT SELECTION |
|
FORMAT SDSLOTCARDB |
|
SET | QUIT |
INFORMATION
•Recording media switches automatically from Slot A to Slot B and vise versa after the card in the selected slot is full.
•You can conveniently record your video and shoot still image in separate SD cards by selecting the card slot (A or B) for each purpose.
Format an SD card when using it for the first time
From the MENU.
Select [FORMAT SD CARD] to format the card.
MEDIA SETTINGS |
|
VIDEO SLOT SELECTION |
|
IMAGE SLOT SELECTION |
|
FORMAT SD CARD |
|
ERASE ALL DATA ON |
|
SET | QUIT |
21
