Still Image Recording
Preparation: • Open the LCD monitor to turn on the camcorder.
•Insert an SD card.
Select # (still image) mode. | Press PLAY/REC to select the recording | |
mode. | ||
| ||
| PLAY/REC | |
| Press and hold SNAPSHOT halfway. | |
| FINE | |
| The ? indicator becomes green when the | |
| captured image is focused. | |
| Press SNAPSHOT fully to take the picture. | |
| FINE [9999] | |
| PHOTO |
ENGLISH
PLAYBACK | RECORDING/ |
|
|
To view the last recorded image Select A after shooting.
Selecting $ during playback deletes that image.
To change the image quality
Change the settings in [IMAGE QUALITY] from the MENU.
To record still images continuously Set to [CONTINUOUS SHOOTING] in [SHUTTER MODE] from the MENU.
To change the aspect ratio of the image Change the settings in [IMAGE SIZE] from the MENU.
To turn on the face detection mode See page 25.
NOTE
•DIS (Digital Image Stabilizer) does not function during still image recording.
•If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically to conserve power. To turn on the camcorder again when using the battery pack, close the LCD monitor and open it again. When using the AC adapter, perform any operation such as zooming.
23
