Indication | Action | |
|
| |
RECORDING FAILURE | • Remove and | |
| be used.) | |
PLAYBACK FAILED | • Remove any dirt from the SD card terminals. | |
• Insert the SD card before switching the power on. | ||
| ||
|
| |
USE AC ADAPTOR | • Use the AC Adapter as power supply. | |
|
| |
POWER IS OFF, OR USB | • Turn on the power of the connected USB device. | |
DEVICE IS UNSUPPORTED | • Connect the AC adapter to the BD/DVD burner. | |
|
| |
• Replace the disc of the BD/DVD burner with another disc. | ||
ALREADY USED |
| |
|
| |
FINALIZATION FAILED | • Replace the disc of the BD/DVD burner with another disc. | |
|
| |
NO FILES | • Slide the mode switch to select the desired mode (! or #). | |
|
| |
VIDEO MANAGEMENT FILE | • Select [OK] to restore. | |
IS DAMAGED, RECOVERY IS |
| |
REQUIRED TO RECORD/ |
| |
PLAYBACK, RECOVER? |
| |
|
| |
NO EVENT REGISTERED | • Register events to the fi les before you start recording. | |
SCENES |
| |
|
| |
CANNOT DETECT FACE | • Turn the face detection mode on before you perform recording | |
or snapshot. | ||
| ||
|
|
ENGLISH
Cleaning
Before cleaning, turn off the camcorder and remove the battery pack and AC adapter.
To clean the camcorder
Wipe the camcorder gently with a soft cloth. If the camcorder is particularly dirty, dip the cloth into diluted mild soap and wring it out well. After wiping with the wet cloth, wipe again with a dry cloth.
To clean the LCD monitor
Wipe the monitor gently with a soft cloth. Be careful not to damage the monitor.
To clean the lens
Wipe gently with lens cleaning paper.
NOTE
•Avoid using strong cleaning agents such as benzine or alcohol.
•Mold may form if the lens is left dirty.
•When using a cleaner or chemically treated cloth, refer to the cautions for each product.
FURTHER INFORMATION
47
