JVC LYT1997-001A-M, GZ-HM200 U Operating Together with TV via Hdmi,  Playback on TV

NOTE

When the video was recorded with x.v.Color™ set to [ON], change the x.v.Color™ setting on TV. For details, refer to the TV’s instruction manual.

Operating Together with TV via HDMI

Connecting the camcorder to an HDMI-CEC*- enabled TV using the HDMI cable allows you to utilize the following convenient functions.

*HDMI-CEC (Consumer Electronics Control) is an industry standard that enables interoperability between HDMI-CEC compliant devices that are connected via HDMI cables.

NOTE

•Not all HDMI-control devices comply with the HDMI-CEC standard. The HDMI control function of the camcorder will not work when connected to these devices.

•The camcorder is not guaranteed to operate with all HDMI-CEC-enabled devices.

•HDMI-CEC does not function immediately after inserting the AC adapter to the AC outlet. Open the LCD monitor to turn on the camcorder.

Preparation:

•Connect an HDMI cable between the camcorder and the TV. ( p. 30)

•Turn on the TV and set the HDMI-CEC related setting to on. (For details, refer to the instruction manual of the TV.)

•Turn on the camcorder and set [HDMI CONTROL] to [ON] from the MENU.

Playback on TV

ENGLISH

Select the	The TV
playback mode.	automatically
	switches to the
	HDMI input. (Turn on
	the TV beforehand.)

Switching off TV and Camcorder

Turn off the TV.	TV	USINGWITH
	The camcorder turns
	off automatically.

Switching Display Language Depending on the TV connected, the display language of the camcorder will automatically switch to the language that is used for the TV when the camcorder is turned on.

(This is applicable only if the camcorder supports the language selected for the TV.) To use the camcorder with a language that differs from the display language of the TV, set [HDMI CONTROL] to [OFF] from the MENU.

NOTE

•The display language of the TV will not switch automatically, even if the display language of the camcorder is changed.

•These functions may not work correctly when devices such as amplifi er and selector are connected. Set [HDMI CONTROL] to [OFF] from the MENU.

•If HDMI-CEC does not work properly, turn off and on the camcorder again.

31