Icom IC-7000 1AUTO NOTCH/VOICE Recorder KEY ANF/ REC, 2SPCH/LOCK KEY SPCH/LOCK, 7MAIN Dial Dial

1PANEL DESCRIPTION

!0MANUAL NOTCH KEY [MNF/ADJ] (p. 83)

➥Push momentarily to turn the manual notch func- tion ON and OFF in SSB, CW and AM modes.

•“ ” appears on the display when the function is ac- tivated.

➥Push and hold for 1 sec. to enter the manual notch filter set mode.

✔What is the notch function?

The notch function is a narrow DSP filter that removes inter- fering tones from CW or AM signals while preserving the de- sired signal's frequency response.

!1AUTO NOTCH/VOICE RECORDER KEY [ANF/• REC]

➥Push momentarily to turn the auto notch function (ANF) ON and OFF in SSB, AM, FM modes. (p. 82)

•“” appears on the display when the function is ac- tivated.

➥Push and hold for 1 sec. to record the received signal’s audio. (p. 95)

!2SPCH/LOCK KEY [SPCH/LOCK]

➥Push momentarily to have the frequency, etc. an- nounced by the speech synthesizer. (p. 34)

•The parameters to be announced can be selected in the miscellaneous (others) set mode. (p. 134)

➥Push and hold for 1 sec. to toggle the dial lock function ON and OFF. (p. 37)

•The dial lock function electronically locks the main dial.

•“ ” appears while the dial lock function is activate.

!3MICROPHONE CONNECTOR (p. 10) Modular-type microphone connector—Accepts the supplied microphone (HM-151).

•The optional OPC-589 can be used to connect an 8-pin microphone such as the SM-20, if desired.

•A microphone connector is also available on the rear panel. DO NOT connect 2 microphones simultaneously.

!4UP/DOWN (BAND) KEYS [Y(BAND)]/[Z(BAND)]

➥Push momentarily to select a frequency band or TV channel.

➥Push and hold [Y(BAND)] for 1 sec. to toggle the simple band scope display ON and OFF.

➥Push and hold [Z(BAND)] for 1 sec. to toggle the multi-function meter display ON and OFF.

!5MAIN DIAL TENSION LATCH

Selects the main dial drag.

•Three positions are available. Upper setting turns on clicks as the dial is turned..

!6HEADPHONE JACK [PHONES] (p. 18) Accepts headphones with 8–16 Ÿ impedance.

•When headphones are connected, no receive audio comes from the speaker.

•When the PHONES/SPEAKER switch on the back of the front panel is set to the [SPEAKER] position, an external

speaker can be used instead of headphones. This is convenient for mobile or outdoor operation.

Back of the front panel

!7MAIN DIAL [DIAL]

Changes the displayed frequency and selects val- ues for selected set mode items, etc.

!8RECEIVE/TRANSMIT INDICATORS [RX]/[TX] ➥[RX]: Lights green in receive mode and when

squelch is open.

➥[TX]: Lights red while transmitting.

See the illustration of the Front panel on page i-2.

3