Icom IC-7000 Recording a message for transmit, Push F-3REC again to stop recording

VOICE RECORDER FUNCTIONS 7

■Recording a message for transmit

DRecording

To transmit a message using a voice recorder, record the desired message in advance as described below.

q Select S-1.

w Push [F-1VO] then [Z(MENU/GRP)] to select the voice root menu.

•If the voice root menu appears, skip the pushing
[Z(MENU/GRP)]. The voice starting menu can be
	[MENU/GRP] [F-1] [F-3]
changed in the miscellaneous (others) set mode.

e Push [F-3MIC] to select the voice memory

recording mode.

r Push [Y(MENU/GRP)] then rotate [DIAL] to adjust the mic gain control so that the “REC LEVEL” in- dicator reads within maximum.

•Speak into the microphone without pushing [PTT]. •Push [F-4DEF] to select the default mic gain.

•Push [Z(MENU/GRP)] to exit the mic gain adjustment condition.

t Push [F-1≤≥] to select the desired memory chan- nel, then push and hold [F-3REC] for 1 sec. to start recording.

•Speak into the microphone without pushing [PTT]. •Previously recorded contents are cleared.

y Push [F-3REC] again to stop recording.

•Recording is automatically terminated when the total time of recorded messages, T1–T4, becomes 90 sec.

u Push [Z(MENU/GRP)] twice to exit the voice mem- ory screen.

7

DConfirming/Erasing the recorded message

•Playing the recorded contents		•Erasing the recoded contents
q Call up the voice memory recording mode as de-		q Call up the voice memory recording mode as de-
scribed in steps q to e as shown above.		scribed in steps q to e as shown above.
w Push [F-1≤≥] to select the desired memory chan-		w Push [F-1≤≥] to select the desired memory chan-
nel, then push [F-2PLY] to start playback.		nel to be erased, push [F-2PLY] to start playback.
•“	” appears.	•“	” appears.
e Push [F-2PLY] again to stop playback, if desired.		e Push and hold [F-4CLR] for 1 sec. to erase the
r Push [Z(MENU/GRP)] twice to exit the voice mem-		contents.
ory mode		r Push [Z(MENU/GRP)] twice to exit the voice mem-

ory mode.

98