Icom IC-7000 instruction manual Operating Rtty FSK, Display the Rtty decoder screen

4RECEIVE AND TRANSMIT

■Operating RTTY (FSK)

When using your RTTY terminal or TNC, consult the manual that comes with the RTTY terminal or TNC.

q Push [Y(BAND)]/[Z(BAND)] to select the desired

band or push a band key on the HM-151.

w Push [MODE] momentarily to select RTTY mode.

•After RTTY mode is selected, push [MODE] for 1 sec. to toggle between RTTY and RTTY-R modes.

e Display the RTTY decoder screen.

•Push and hold [MENU/GRP] for 1 sec. once or twice

to select the menu group S.

•Push [MENU/GRP] momentarily one or more times to select the menu S-1.

•Push [F-2DEC] to display the Baudot decoder screen.

r Rotate [DIAL] to simultaneously tune a desired sig- nal.

•Use [F-21/4] in the M-3display when critical setting is required.

•S-meter indicates received signal strength when signal is received.

•If the received signal cannot be demodulated, try se- lecting RTTY-R mode (or RTTY mode).

[AF] [MODE] [TX] indicator

[Y]

[Z]

[MENU/GRP] [F-2]	[DIAL]
“RTTY” or “RTTY-R” appears

t Transmit a SEND signal from your TNC.

•[TX] indicator lights red.

•The Po meter indicates transmitted RTTY signal strength.

y Operate the connected PC or TNC (TU) to trans- mit RTTY (FSK) signals.

51