Icom IC-7000 DUP Offset 144M, DUP Offset 430M, One Touch Repeater, Auto Repeater

SET MODE 13

■Miscellaneous (others) set mode (continued)

13 DUP Offset 144M

This item sets the offset (difference between transmit and receive frequencies) for duplex operation. How- ever, this setting is used to input the repeater offset for an 144 MHz band only.

The offset frequency can be set from 0.000 MHz to +9.999 MHz in 1 kHz steps.

0.600MHz

0.6 MHz offset (default)

14 DUP Offset 430M

This item sets the offset (difference between transmit and receive frequencies) for duplex operation. How- ever, this setting is used to input the repeater offset for the 430 MHz band.

The offset frequency can be set from 0.000 MHz to +9.999 MHz in 1 kHz steps.

5.000MHz

5 MHz offset (default)

15 One Touch Repeater

This item turns the one touch repeater function ON (DUP-, DUP+) and OFF.

When [F-2DUP] (M-3) is pushed and held for 1 sec., the selected offset direction and programmed duplex offset frequency (depending on the operating fre- quency band) is set with the displayed frequency.

DUP-	OFF
Minus offset direction is se-	One touch repeater function
lected. (default)	is OFF.

13

16 Auto Repeater

This item turns the auto repeater function ON-1 (auto duplex setting), ON-2 (auto duplex setting and acti- vating tone encoder) or OFF.

See p. 65 for details concerning the auto repeater function.

ON-1OFF

Auto duplex setting is ON. Auto repeater function is

(default)OFF.

17 Tuner (Auto Start)

The optional AT-180 ANTENNA TUNER has an automatic start capability which starts tuning if the SWR is higher than 1.5–3:1.

When “OFF” is selected, the tuner remains OFF even when the SWR is poor (1.5–3:1). When “ON” is se- lected, automatic tune starts even when the tuner is turned OFF.

ON	OFF
Automatic tune function is	Automatic tune function is
ON.	OFF. (default)

Even when “ON” is selected, automatic tune does not start for the 50 MHz band.

132