Icom IC-7000 Contest number set mode, Setting the contact serial number, Number Style

RECEIVE AND TRANSMIT 4

DContest number set mode

This menu is used to set the contest (serial) number and incrementing trigger channel, etc.

[MODE]

	[F-1]
[MENU/GRP]	[F-2] [F-3] [F-4]

•Setting the contact (serial) number

Contact number can be automatically transmitted from one of the memory keyer channels. The Morse cut numbers can be used as the contact numbers. The maximum number for contact numbers is 9999.

q Select CW mode with [MODE]. w Select S-1.

•Push and hold [MENU/GRP] for 1 sec. once or twice

to select the menu group S.

•Push [MENU/GRP] momentarily one or more times to select the menu S-1.

e Push [F-2KEY] then [Z(MENU/GRP)] to select the keyer root menu.

r Push [F-3001] to enter the contest number set menu.

t Push [F-1≤] or [F-2≥] to select the desired set item.

•Push [F-4DEF] for 1 sec. to select the default condi- tion or value.

y Push [Z(MENU/GRP)] twice to exit the contest num- ber set menu and return to normal CW mode indi- cation.

4

1 Number Style

This item sets the numbering system used for contest (serial) numbers— normal or cut numbers.

Normal : Does not use morse cut number (default)

190➜ANO: Sets 1 as A, 9 as N and 0 as O.

190➜ANT : Sets 1 as A, 9 as N and 0 as T. 90➜ NO : Sets 9 as N and 0 as O.

90➜ NT : Sets 9 as N and 0 as T.

2 Count UP Trigger

This selects which of the four memory channels will have the contest serial number exchange. The count up trigger increments the serial number automatically after each complete serial number exchange is sent.

•M1, M2, M3 and M4 can be set. (default: M2)

3 Present Number

This item shows the current number in the count up trigger channel set above.

•Rotate [DIAL] to change the number, or push [F-4CLR] for 1sec. to reset the current number to 001.

48