Icom IC-7000 instruction manual Operating FM, Preamp and attenuator p DSP noise reduction p

4RECEIVE AND TRANSMIT

■Operating FM

q Push [Y(BAND)]/[Z(BAND)] to select the desired	[AF] [MODE] [TX] indicator
band or push a band key on the HM-151.
w Push [MODE] momentarily or push and hold for 1
sec. to select FM mode.
•After FM, WFM or AM mode is selected, push [MODE]

for 1 sec. to select from FM, WFM and AM modes.

e Rotate [DIAL] to tune in a desired signal.

•The S-meter indicates received signal strength when a
signal is received.		[DIAL]
•The default tuning step for FM mode is 1 kHz; this can
be changed using the tuning step program mode. (p. 30)	“FM” appears
r Rotate [AF] to set audio to a comfortable listening
level.
t Push [PTT] (microphone) to transmit.
• [TX] indicator lights red.
y Speak into the microphone at your normal voice
level.

•Adjust ‘MIC Gain’ at this step, if necessary. (p. 38)

u Release [PTT] (microphone) to return to receive.

[Y]

[Z]

DConvenient functions for receive

•Preamp and attenuator (p. 74)		•DSP noise reduction (p. 81)
➥ Push [P.AMP/ATT] momentarily to turn the pre-		➥ Push [NR/LEV] to turn the DSP noise reduction
amp ON or OFF.		ON and OFF.
•“	” appears when the preamp is set to ON.	•“	” appears when the DSP noise reduction is set to
➥ Push [P.AMP/ATT] for 1 sec. to turn the attenua-			ON.
tor ON.		➥ Push [NR/LEV] for 1 sec. to enter the noise re-
•Push [P.AMP/ATT] momentarily to turn the attenuator		duction level set mode, then rotate [DIAL] to ad-
OFF.		just the DSP noise reduction level.
•“	” appears when the attenuator is set to ON.	•VSC (voice squelch control) (p. 84)
•Auto notch filter (p. 82)
		➥ While “S-1” is selected, push [F-4VSC] to turn
➥ Push [ANF/• REC] to turn the auto notch filter ON		the VSC function ON and OFF.
and OFF.		•“	” appears when VSC function is set to ON.
•“	” appears when the auto notch filter is set to ON.

D Convenient functions for transmit

•VOX (voice operated transmit) (p. 85)		•Transmit quality monitor (p. 89)
➥ While “M-3” is selected, push [F-1VOX] to turn		➥ Push [AF(SET)], then [F-4OTH] to enter the mis-
the VOX function ON and OFF.		cellaneous (others) set mode. Select an item with
		[F-1≤]/[F-2≥], then rotate [DIAL] to turn the
	•Push and hold [MENU/GRP] for 1 sec. once or twice
	to select the menu group M.	monitor function ON and OFF.
	•Push [MENU/GRP] momentarily one or more times
	to select the menu M-3.
•“VOX” appears when the VOX function is set to ON.
➥ While “M-3” is selected, push [F-1VOX] for 1
sec. to enter the VOX set mode.
•Push [F-1≤]/[F-2≥] to select an item.
•Rotate [DIAL] to set the value/conditions.

59