Icom IC-7000 instruction manual Operating CW, Set CW setting in the keyer set mode S-1

4RECEIVE AND TRANSMIT

■Operating CW

q Connect a paddle or straight key as on page 22. w Push [Y(BAND)]/[Z(BAND)] to select the desired

band or push a band key on the HM-151.

e Push [MODE] momentarily to select CW mode.

•After CW mode is selected, push [MODE] for 1 sec. to toggle between CW and CW-R modes.

r Rotate [DIAL] to tune in a desired signal with the desired tone frequency.

t Rotate [AF] to set audio to a comfortable listening level.

y Set CW break-in operation as semi break-in, full break-in or OFF.

•Push and hold [MENU/GRP] for 1 sec. once or twice

to select the menu group M.

•Push [MENU/GRP] momentarily one or more times to select the menu M-3.

•Push [F-1BRK] one or more times to select the CW break-in operation.

•“,” “,” and “OFF (no indication)” appears.

➧BK-IN: semi break-in

➧F-BK : full break-in

➧OFF : no break-in (ACC socket connection is neces- sary as shown on page 22.)

u Set the CW delay time when semi break-in opera- tion is selected.

•Push [F-1BRK] for 1 sec. to enter the break-in delay

time set mode.

•Rotate [DIAL] to set the desired delay time.

i Set CW setting in the keyer set mode (S-1).

•Push and hold [MENU/GRP] for 1 sec. once or twice

to select the menu group S.

•Push [MENU/GRP] momentarily one or more times to select the menu S-1.

•Push [F-2KEY], [Z(MENU/GRP)], then [F-4SET] to

enter the keyer set mode. (p. 49)

o Keying to transmit, use the electric keyer or paddle to send your CW signals.

• [TX] indicator lights red.

•The Po meter indicates transmitted CW signal strength.

!0Stop keying to return to receive.

[AF] [MODE] [TX] indicator

[Y]

[Z]

[MENU/GRP] [F-1] [F-2] [F-4]	[DIAL]
“CW” or “CW-R” appears

Appears

Semi break-in operation is selected.

Delay time of 7.5 dots is selected for semi break-in operation.

41