Icom IC-7000 Control Command, Remote jack CI-V information, CI-V connection example, Data format

CONTROL COMMAND 17

■Remote jack (CI-V) information

DCI-V connection example

The transceiver can be connected through an optional CT-17 CI-V LEVEL CONVERTER to a personal computer equipped with an RS-232C port. The Icom Communi- cation interface-V (CI-V) controls the following func- tions of the transceiver.

Up to four Icom CI-V transceivers or receivers can be connected to a personal computer equipped with an RS-232C port. See p. 82 for setting the CI-V condition using initial set mode.

DData format

The CI-V system can be operated using the following data formats. Data formats differ according to com- mand numbers. A data area is added for some com- mands.

	9–15 V DC
	Personal
	computer
IC-7000	mini-plug cable

CONTROLLER TO IC-7000

FE FE 70 E0 Cn Sc Data area FD

OK MESSAGE TO CONTROLLER

FE FE 70 E0 FB FD

	Transceiver’sdefault address
		Controller’s default address
Preamble code (fixed)			Command number

	BCDcode data for frequency ormemory number entry	End of message code (fixed)
(see table below) Sub command number (see table below)

	Transceiver’sdefault address	Controller’s default address		End of message code (fixed)
			NG code OK code (fixed) (fixed)
Preamble code (fixed)

16

FE

FE

E0

70

Cn

Sc

Data area

FD

FE

FE

70

E0

FA

FD

IC-7000 TO CONTROLLER

NG MESSAGE TO CONTROLLER

17

DCommand table

Command	Sub command	Description
00	—	Send frequency data
01	Same as	Send mode data
	command 06
02	—	Read band edge frequencies
03	—	Read operating frequency
04	—	Read operating mode
05	—	Set operating frequency
06	00	Select LSB
	01	Select USB
	02	Select AM
	03	Select CW
	04	Select RTTY
	05	Select FM
	07	Select CW-R
	08	Select RTTY-R
07	—	Select VFO mode
	00	Select VFO A
	01	Select VFO B
	A0	Equalize VFO A and VFO B

Command	Sub command	Description
07	B0	Exchange VFO A and VFO B
08	—	Select memory mode
	0001–0105*	Select memory channel
		*P1=0100, P2=0101
	0106, 0107	Select the call channel
		(C1=0106, C2=0107)
	A0	Set the bank number
		(1=A, 2=B, 3=C, 4=D, 5=E)
09	—	Memory write
0A	—	Memory to VFO
0B	—	Memory clear
0C	—	Read offset frequency
0D	—	Set offset frequency
0E	00	Scan stop
	01	Programmed/memory scan start
	02	Programmed scan start
	22	Memory scan start
	23	Select memory scan start

144