Icom IC-7000 instruction manual Specifications, General

■General

•Frequency coverage : Receive

30kHz–199.999999 MHz*1*2 400–470.000000 MHz*1*2

Transmit
1.800–1.999999 MHz*2,		3.500–3.999999 MHz*2
5.33050*3, 5.34650*3, 5.36650*3,
5.37150*3, 5.40350*3,
7.000–7.300 MHz*2,		10.100	–10.150 MHz*2,
14.000	–14.350 MHz*2,	18.068	–18.168 MHz*2,
21.000	–21.450 MHz*2,	24.890	–24.990 MHz*2,
28.000	–29.700 MHz*2,	50.000–54.000 MHz*2,

144.000–148.000 MHz*2, 430.000–450.000 MHz*2

*1Some frequency bands are not guaranteed. *2Depending on version. *3USA version only.

•Mode	: SSB, CW, RTTY, AM, FM, WFM
	(WFM is for receive only)

•Number of memory CH: 503 (split memory: 99⋅5 banks; scan

	edges: 6; call channel: 2 ) channels
•Antenna connector	: SO-239⋅2(for HF/50 MHz and
	144/430 MHz) /50 Ÿ
•Usable temperature	: –10°C to +60°C (+14°F to +140°F)
range
•Frequency stability	: Less than ± 0.5 ppm
	(0°C to +50°C; +32°F to +122°F)
•Power supply	: 13.8 V DC±15% (negative ground)
requirement
•Current drain	: Transmit (at 100 W)	22 A
(at 13.8 V DC)	Receive squelched	1.3 A
	max. audio	1.6 A
•Dimensions	: 167(W) ⋅ 58(H) ⋅ 180(D) mm,
(projections not included) 69⁄16(W) ⋅ 29⁄32(H) ⋅ 73⁄32(D) in
•Weight (approx.)	: 2.3 kg (5 lb 1 oz)
•CI-V connector	: 2-conductor 3.5 (d) mm (1⁄8˝)
•Video connector	: 2-conductor 3.5 (d) mm (1⁄8˝)
•ACC connector	: 13-pin
•Data connector	: 6-pin

■Transmitter

•Output power	:
SSB, CW, FM, RTTY 2–100 W (1.8–50 MHz bands)
	2–50 W (144 MHz band)
	2–35 W (430 MHz band)
AM	1–40 W (1.8–50 MHz bands)
	2–20 W (144 MHz band)
	2–14 W (430 MHz band)
•Modulation system	:
SSB	Balanced modulation
AM	Low level modulation
FM	Variable reactance modulation
•Spurious emissions	: Less than –60 dB*

*spurious freq.: below 30 MHz: –50 dB; above 50 MHz: –60 dB

•Carrier suppression	: More than 50 dB
•Unwanted sideband	: More than 50 dB
•Microphone	: 8-pin modular jack (600 Ÿ)
connector
•KEY connector	: 3-conductor 6.35 (d) mm (1⁄4˝)
•RTTY connector	: 3-conductor 3.5 (d) mm (1⁄8˝)

SPECIFICATIONS 18

■Receiver

•Receive system			:
	SSB/CW/RTTY/AM/FM Triple-conversion superheterodyne
	WFM Double-conversion superheterodyne
•Intermediate frequencies:
	1st
	SSB/CW/RTTY/AM/FM					124.487 MHz
	WFM					134.732 MHz
	TV (Video)					69.0100 MHz
	2nd
	SSB/CW/RTTY/AM/FM					455 kHz
	WFM					10.700 MHz
	3rd
	SSB/CW/RTTY/AM/FM					16.15 kHz
•Sensitivity (at preamp ON):
	Frequency	SSB/CW/				AM	FM			WFM
	range		RTTY
					10 dB S/N		12 dB SINAD	12 dB SINAD
	[MHz]		10 dB S/N
	0.5–1.8		—			13 µV	—			—
	1.8–28		0.15 µV			2.0 µV	—			—
	28–29.995						0.5 µV			—
	50 MHz band		0.12 µV			1.0 µV	0.25 µV			—
	76–108		—			—	—		10.0 µV
	144/430 MHz		0.11 µV			1.0 µV	0.18 µV			—
	bands
•Squelch sensitivity (threshold; preamp ON) :
	SSB/CW/RTTY/AM			Less than 5.6 µV
	FM			Less than 0.3 µV
•Selectivity			:
	SSB* (BW=2.4 kHz) More than 2.4 kHz/–6 dB
				Less than 3.6 kHz/–60 dB
	CW* (BW=500 Hz)			More than 500 Hz/–6 dB
				Less than 900 Hz/–60 dB
	RTTY (BW=350 Hz) More than 360 Hz/–6 dB
											17
				Less than 650 Hz/–60 dB
	AM (BW=6 kHz)			More than 6.0 kHz/–6 dB
				Less than 15.0 kHz/–60 dB							18
	FM (BW=15 kHz)			More than 12.0 kHz/–6 dB

Less than 20.0 kHz/–60 dB

*IF filter shape is set to SHARP.

•Spurious and image rejection ratio:

HF bands	More than	70 dB
50 MHz band	More than	70 dB (except IF/2 through)
144/430 MHz band	More than	65 dB (except IF through)
•Audio output power	: More than	2.0 W at 10% distortion
	with an 8 Ÿ load (at 13.8 V DC)
•RIT variable range	: ±9.99 kHz
•PHONES connector	: 3-conductor 3.5 (d) mm (1⁄8˝)/8 Ÿ
•EXT SP connector	: 2-conductor 3.5 (d) mm (1⁄8˝)/8 Ÿ

150