Icom IC-7000 Keyer set mode, Setting the electronic keyer, Keyer Repeat Time, Dot/Dash Ratio

4RECEIVE AND TRANSMIT

D Keyer set mode

This set mode is used to set the memory keyer repeat	•Setting the electronic keyer
time, dash weight, paddle specifications, keyer type,	q Select CW mode with [MODE].
etc.
	w Select S-1.

[MODE]

	[F-1]
[MENU/GRP]	[F-2] [F-3] [F-4]

•Push and hold [MENU/GRP] for 1 sec. once or twice

to select the menu group S.

•Push [MENU/GRP] momentarily one or more times to select the menu S-1.

e Push [F-2KEY] then [Z(MENU/GRP)] to select the keyer root menu.

r Push [F-4SET] to enter the keyer set menu.

t Push [F-1≤] or [F-2≥] to select the desired set item.

•Push [F-4DEF] for 1 sec. to select the default condi- tion or value.

y Push [Z(MENU/GRP)] twice to exit the keyer set menu and return to normal CW mode indication.

1 Keyer Repeat Time

When sending CW using the repeat timer, this item sets the time between transmission.

•1 to 60 sec. in 1 sec. steps can be selected.

•Push [F-4DEF] for 1 sec. to select a default setting. (default: 2 sec.)

2 Dot/Dash Ratio

This item sets the dot/dash ratio.

Keying weight example: Morse code “K”

DOT (Fixed*)

Weight setting: DASHDASH 1:1:3 (default)

Weight setting:

Adjusted

Adjustable range SPACE (Fixed*)

*SPACE and DOT length can be adjusted with “Key Speed” only in the quick set mode.

•1:1:2.8 to 1:1:4.5 can be set.

•Check the ratio with side tone in CW mode.

•Push [F-4DEF] for 1 sec. to select a default ratio of 1:1:3.0.

49