Icom IC-7000 Frequency transferring, Transferring in VFO mode, Select a memory channel with M-ch

8MEMORY OPERATION

■Frequency transferring

The frequency and operating mode in a memory chan- nel can be transferred to the VFO.

Frequency transferring can be performed in either VFO mode or memory mode.

DTransferring in VFO mode

Menu group selection

Push [MENU/GRP] for 1 sec.

Selection from: M, S or G(Graphic)

Menu selection (Example: M)

Push [MENU/GRP] momentarily.				Either
Selection from:	,	or		Y or Z
	M-1 M-2		M-3

This is useful for transferring programmed contents to VFO.

q Select the menu M-2.

•Push and hold [MENU/GRP] for 1 sec. once or twice

to select the menu group M.

•Push [MENU/GRP] momentarily one or more times to select the menu M-2.

w Push [F-4V/M] momentarily to select the VFO mode.

e Push [F-1MEM] to display the memory channel contents.

•Memory channel contents appear above the multi-func- tion key indicator.

r Push [PBT/M-ch/RIT]momentarily to select the M- ch/RIT function, if the twin PBT is selected.

• [PBT/M-ch/RIT]indicator (Green) goes out.

[PBT/M-ch/RIT] switch/[M-ch] (inner) control [PBT/M-ch/RIT] indicator

[MENU/GRP] [F-1] [F-4]

[EXAMPLE]: Transferring contents of memory 16.

Operating frequency : 21.320	MHz/USB (VFO)
Contents of memory 16 : 14.020	MHz/CW

t Select a memory channel with [M-ch].

•“ ” appears if the selected memory channel is a blank channel (and does not have contents). In this case transferring is not possible.

y Push [F-4V/M] for 1 sec. to transfer the frequency and operating mode.

•Transferred frequency and operating mode appear in the display.

V/M

Push for

1 sec.

109