Icom IC-7000 Pre-setting for using Rtty terminal or TNC, Mark frequency, Shift width

RECEIVE AND TRANSMIT 4

DPre-setting for using RTTY terminal or TNC

When using your RTTY terminal or TNC, consult the manual that comes with the RTTY terminal or TNC.

[AF] [MODE]

		Mark frequency
		q Push [MODE] momentarily to select RTTY mode.
		•After RTTY mode is selected, push [MODE] for 1 sec.
[MENU/GRP] [F-1] [F-2] [F-4]	[DIAL]
		to toggle between RTTY and RTTY-R modes.

4

RTTY mark frequency is set to 2125 Hz. (default)

2125, 1615 and 1275 Hz are available.

RTTY shift width is set to 170 Hz. (default)

170/200/425 Hz are available.

RTTY keying is set to ‘normal’. (default)

normal :

key open=mark key close=space

reverse:

key open=space key close=mark

w Push [AF(SET)] momentarily to enter the set mode menu.

e Push [F-1QS] to enter the quick set mode.

r Push [F-1Y] or [F-2Z] to select “RTTY Mark

Frequency.”

t Rotate [DIAL] to select the desired frequency.

•Push [F-4DEF] for 1 sec. to select the default fre- quency.

Shift width

q Enter the quick set mode as same as above.

w Push [F-1Y] or [F-2Z] to select “RTTY Shift Width.”

e Rotate [DIAL] to select the desired shift width.

•Push [F-4DEF] for 1 sec. to select the default shift width.

RTTY keying polarity

q Enter the quick set mode as same as above.

w Push [F-1Y] or [F-2Z] to select “RTTY key- ing Polarity.”

e Rotate [DIAL] to select the desired keying polarity.

•Push [F-4DEF] for 1 sec. to select the default polarity.

After Pre-setting is finished, push [Z(MENU/GRP)] mo- mentarily twice to return the normal operating mode.

56