Icom IC-7000 instruction manual Memory names, Editing programming memory names

8MEMORY OPERATION

Menu group selection

Push [MENU/GRP] for 1 sec.

Selection from: M, S or G(Graphic)

Menu selection (Example: M)

Push [MENU/GRP] momentarily.				Either
Selection from:	,	or		Y or Z
	M-1 M-2		M-3

DMemory names

All memory channels (including scan edges) can be tagged with alphanumeric names of up to 9 charac- ters each.

Capital letters, small letters, numerals, some symbols (! # $ % & ¥ ? " ’ ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } _ _ @) and spaces can be used.

•Editing (programming) memory names

q Select the menu M-2.

w Push [F-4V/M] to select memory mode.

e Push [F-1](MEM, LST) twice to enter the memory

channel list.

r Push [PBT/M-ch/RIT]momentarily to select the M- ch/RIT function, if the twin PBT is selected.

• [PBT/M-ch/RIT]indicator (Green) goes out.

t Rotate [M-ch](inner) control to select the desired memory channel.

•All memory channels including blank channels can be selected.

•[Y]/[Z] on the microphone also changes the channels. y Push [F-2NAM] to edit memory channel name.

•A cursor appears and blinks.

•Memory channel names of blank channels cannot be

edited.

u Push [Y(MENU/GRP)] several times to select the de-

sired character group.

•[ABC], [abc], [123] or [etc] indicates the capital letters,

small letters, numerals or symbols, respectively i Input the desired character by rotating [DIAL].

•Push [F-1Å] or [F-2Ç] for cursor movement. •Push [F-3DEL] to delete the selected character. •Push [F-4SPC] to input a space.

•Pushing the HM-151’s keypad, [0]–[9], can also enter numerals.

o Push [Z(MENU/GRP)] to input and set the name.

•The cursor disappears.

!0Repeat steps t to o to program another memory channel’s name, if desired.

!1Push [Z(MENU/GRP)] twice to exit the memory channel list.

[PBT/M-ch/RIT] switch/[M-ch] (inner) control [PBT/M-ch/RIT] indicator

	[F-1]
[MENU/GRP]	[F-2] [F-3] [F-4]	[DIAL]

NAM

Selected character Push

Rotate

Ç

Push

107