Icom IC-7000 instruction manual Programmable tuning step, Selecting kHz step

BASIC OPERATION 3

DProgrammable tuning step

The operating frequency can be changed in steps of (0.01 (AM/FM/WFM only), 0.1, 1, 5, 9, 10, 12.5, 20 25 or 100 kHz selectable) for quick tuning.

Appears [TS] [DIAL]

q Push [TS] momentarily to turn the programmable tuning function ON.

•“Z” appears when the programmable tuning function is ON.

Programmable tuning step indicator

w Rotate [DIAL] to change the frequency in pro- grammed kHz steps.

e Push [TS] again to turn the programmable tuning function OFF.

•“Z” disappears.

r Rotate [DIAL] for normal tuning, if desired.

3

DSelecting “kHz” step

Programmable tuning steps are available to suit your operating requirements.

These tuning steps are:

•Independently selectable for each mode •Selectable from 0.01 (AM/FM/WFM only), 0.1, 1, 5, 9, 10, 12.5, 20, 25 and 100 kHz

[MODE] [TS] [DIAL]

q Push [TS] momentarily to turn the programmable tuning step ON.

•“Z” appears when the programmable tuning function is ON.

w Push [TS] for 1 sec. to enter the tuning step set- ting display.

•The tuning step setting for the selected mode appears.

Appears

e Select the desired operating mode with [MODE].

(see p. 34)

r Rotate [DIAL] to select the desired tuning step from 0.01 (FM/WFM/AM only), 0.1, 1, 5, 9, 10, 12.5, 20, 25 or 100 kHz.

•Push [F-4DEF] for 1 sec. to return to the default set- ting, if desired.

t Repeat steps e and r to select the “kHz” tuning

steps for other modes, if desired.

y Push [TS] (or [Z(MENU/GRP)]) to exit the setting display.

30