Icom IC-7000 instruction manual Functions for Transmit, Adjusting the VOX function

6 FUNCTIONS FOR TRANSMIT

■VOX function

The VOX (Voice-Operated Transmission) function switches between transmit and receive with your voice. This function provides an opportunity for hands-free operation or to input log entries into your computer, etc., while operating.

q Select a phone mode (SSB, AM, FM) with [MODE]. w Select M-3.

•Push and hold [MENU/GRP] for 1 sec. once or twice

to select the menu group M.

•Push [MENU/GRP] momentarily one or more times to select the menu M-3.

e Push [F-1VOX] to toggle the VOX function ON and OFF.

• “” appears while the VOX is in use.

Appears [MENU/GRP] [F-1]

The VOX gain, ANTI-VOX and VOX delay can be set in

VOX set mode.

DAdjusting the VOX function

		q Select a phone mode (SSB, AM, FM).
		w Select M-3.
			•Push and hold [MENU/GRP] for 1 sec. once or twice
			to select the menu group M.
			•Push [MENU/GRP] momentarily one or more times to
			select the menu M-3.
		e Push [F-1VOX] for 1 sec. to enter the VOX set
[MENU/GRP] [F-1] [F-2]	[DIAL]	mode.
		r Select the VOX gain item using [F-1≤] or [F-2≥].
		t While speaking into the microphone, rotate [DIAL]
		to the point where the transceiver is continuously
		transmitting.
		y Adjust the VOX delay for a convenient interval be-
		fore returning to receive.
			- Select the VOX delay item using [F-1≤] or [F-2≥].
			- Rotate [DIAL].
		u If the receive audio from the speaker causes the
		VOX circuit to switch to, adjust the anti VOX to the
		point where it has no effect.

85