Icom IC-7000 Menu S-1 functions, Menu S-2 functions, Dtmf Operation, Select Scan

1PANEL DESCRIPTION

DMenu S-1 functions

DURING SSB/AM OPERATION:

VO		MET	VSC
F-1	F-2	F-3	F-4

DURING CW OPERATION:

VO KEY MET VSC

F-1 F-2 F-3 F-4

DURING RTTY OPERATION:

VO DEC MET VSC

F-1 F-2 F-3 F-4

DURING FM/WFM OPERATIONS:

VO DTM MET VSC

F-1 F-2 F-3 F-4

VO (p. 95)

VO	Push to enter the voice recorder mode.
	•The voice TX/RX menu or voice root menu
F-1	appears depending on the “VOICE 1st
	Menu” setting in the miscellaneous (others)
	set mode. (p. 136)

METER SELECTION (p. 36)

	MET	Push to select the type of metering dis-
		played (during transmit) on the display.
	F-3	•Power, SWR, ALC or COMP metering can be
		selected.
		•Only an S-meter is available during receive.
VOICE SQUELCH CONTROL (p. 84)
	VSC	Push to toggle the voice squelch control
	F-4	function ON and OFF.
KEYER OPERATION (p. 45)
	KEY	Push to enter the memory keyer mode.
	F-2	•The keyer send menu or keyer root menu ap-
		pears depending on the “KEYER 1st
		Menu” setting in the miscellaneous (others)
		set mode.(p. 136)
RTTY DECODER FUNCTION (p. 54)
	DEC	Push to toggle the RTTY decoder display
	F-2	ON and OFF.
		•RTTY decoder screen appears.

DTMF OPERATION

DTM	Push to enter DTMF memory mode.
F-4	(p. 67)
	•The DTMF send menu or DTMF root menu
	appears depending on the “DTMF 1st
	Menu” setting in the miscellaneous (others)
	set mode. (p. 136)

DMenu S-2 functions

DURING VFO MODE:

SCN PRI V/M VSC

F-1 F-2 F-3 F-4

DURING MEMORY MODE:

SCN SEL V/M VSC

F-1 F-2 F-3 F-4

SCAN (pgs. 113–115)

SCN ➥Push momentarily to start or stop the scan function.

F-1

PRIORITY WATCH (p. 115)

PRI Push to start or stop priority watch.

F-2

VFO/MEMORY SELECTION

V/M ➥Push momentarily to toggle VFO and memory modes. (pgs. 27, 102)

F-3➥Push and hold for 1 sec. to transfer the frequency and operating mode in the se- lected memory channel to the currently displayed VFO. (p. 109)

VOICE SQUELCH CONTROL (p. 84)

VSC	Push to toggle the voice squelch control
F-4	function ON and OFF.

SELECT SCAN

SEL ➥Push momentarily to toggle the select
F-2	scan settings ON and OFF for the se-
	lected memory channel. (pgs. 106, 115)

➥Push and hold for 2 sec. to clear all select scan setting. (p. 115)

➥While scanning, push to toggle the se- lected memory scan ON and OFF. (p. 115)

7