INSTALLATION (Refer to Figure 4):
1.Spread out the gasket “C” over the workbench at the edge of the cut out tak- ing care to overlap the gasket at the corners.
2.Slot in the cooking hob into the cut out of the workbench and locate it cor- rectly.
3.Adjust the clamps “A” and tighten the screws “B” until the hob is firmly secured.
4.Using a sharp tool, trim any excess gasket which protrudes from the edge of the hob. Take care not to damage the countertop.
| Figure 4 |
|
| C |
|
B | min. | max. |
| A | 40 mm |
| 20mm | |
|
| 7 |
