ELECTRICAL REQUIREMENTS:
WARNING:
■THIS APPLIANCE MUST BE EARTHED.
CAUTION:
■Ensure that the power outlet is properly earthed before connecting the appliance.
■Disconnect power before servicing the appliance.
The appliance is provided with a standard 240VAC three pin plug and power cable (3 x 0.75 mm2).
The wires in the power cable are coloured in accordance with the following code: Green/Yellow = Earth, Blue = Neutral, Brown = Active.
If the colours of the wires in the power cable to the appliance do not correspond with the coloured markings identifying the terminals in the junction terminal, proceed as follows:
1. The wire which is coloured green and yellow must be connected to the terminal marked E (Earth) or coloured Green.
2 The wire which is coloured blue must be connected to the terminal marked N (Neutral) or coloured Black.
3.The wire which is coloured brown must be connected to the terminal marked L (Live) or A (Active) or coloured Red.
If the supply cord is damaged it must be replaced by the manufacturer or it’s Service Agent or a similarly qualified person in order to avoid a hazard.
Figure 10
N 
L
M
A
|
|
|
|
PA | PA | PA | PA |
ELECTRIC DIAGRAM KEY
PA | Ignition switches group |
AIgnition coil
M Terminal block
T Earth conductor
12
