Icom IC-7000 instruction manual Split offset frequency setting, Quick split setting, Erating mode

6FUNCTIONS FOR TRANSMIT

DSplit offset frequency setting

By setting an often-used split frequency offset in ad- vance, you can operate the quick split function to se- lect split operation at the push of one key.

q Push [AF(SET)] momentarily to enter the set mode menu.

w Push [F-4OTH] to enter the miscellaneous (oth- ers) set mode.

e Push [F-1≤] or [F-2≥] to select “SPLIT Off-

set.”

r Rotate [DIAL] to set the desired split offset.

•The split offset can be selected from –9.999 MHz to +9.999 MHz.

•Push [F-4DEF] for 1 sec. to return to default value.

t Push [Z(MENU/GRP)] twice to return the normal op- erating mode.

[AF]

[MENU/GRP] [F-1] [F-2] [F-4] [DIAL]

DQuick split setting

q Enter the miscellaneous (others) set mode as above.

w Push [F-1≤] or [F-2≥] to select “Quick SPLIT,” then rotate [DIAL] to select the desired

setting.

•Push [F-4DEF] for 1 sec. to return to default setting. e Push [Z(MENU/GRP)] twice to return the normal op-

erating mode.

93