Icom IC-7000 Memory Operation, Memory channels, Memory channel selection, Number

MEMORY OPERATION 8

■Memory channels

The transceiver has 501 memory channels includes 6	All 503 memory/call channels are tuneable which
scan edge channels (3 pairs), and 2 call channels. In	means the programmed frequency can be tuned tem-
addition, a total of 5 memory banks (99 memory chan-	porarily with [DIAL], etc., in memory mode.
nel each), A to E, are available for usage by group, etc.
Memory mode is very useful for quickly changing to

often-used frequencies.

MEMORY	MEMORY		TRANSFER	OVER-
	CHANNEL	CAPABILITY			CLEAR
CHANNEL			TO VFO	WRITING
	NUMBER
		Independent transmit and receive
Regular	1–99	frequencies and one mode in each
	(in each	memory channel.	Yes	Yes	Yes
(split memory)
	banks)	In addition, tone frequencies can
		also be stored for repeater use.
	1A–3B	One frequency and one mode in
Scan edges		each memory channel as scan	Yes	Yes	No
	(common)
		edges for programmed scan.
Call channels	C1, C2	Same as regular channels, but 144
		MHz (C1), 430 MHz (C2) band can	Yes	Yes	No
(split memory)	(common)
		be programmed.

7

8

■Memory channel selection

q Push [PBT/M-ch/RIT]momentarily to select the M- ch/RIT function, if the twin PBT is selected.

•[PBT/M-ch/RIT]indicator (Green) goes out. w Select the menu M-2.

•Push and hold [MENU/GRP] for 1 sec. once or twice

to select the menu group M.

•Push [MENU/GRP] momentarily one or more times to select the menu M-2.

e Push [F-4V/M] to select memory mode.

r Rotate [M-ch](inner) control to select the desired memory channel.

•All memory channels including blank channels can be selected.

•Rotating [RIT] (outer) control changes the bank.

•[Y]/[Z] on the microphone also change the channels. t To return to VFO mode, push [F-4V/M] again.

[PBT/M-ch/RIT] switch/[M-ch] (inner) control

[PBT/M-ch/RIT] indicator

[MENU/GRP]

[RIT] (outer) control [F-4]

[EXAMPLE]: Selecting memory channel 17.

V/M

102