Icom IC-7000 RF/SQL Control, Quick Split, Split Offset, DUP Offset HF, DUP Offset 50M

13 SET MODE

■Miscellaneous (others) set mode (continued)

7 RF/SQL Control

The [RF/SQL] control can be set as the RF/squelch	RF+SQL	[RF/SQL] control as RF/squelch control
control (default), the squelch control only (RF gain is	SQL	[RF/SQL] control as squelch control
fixed at maximum) or ‘Auto’ (RF gain control in SSB,
CW and RTTY; squelch control in AM and FM).	AUTO	[RF/SQL] control as RF gain control in SSB,
See pgs. 1, 35 for details.		CW and RTTY; squelch control in AM and
		FM (default)

8 Quick SPLIT

When this item is set to ON, pushing and holding [F-1	ON	OFF
SPL] (M-1) for 1 sec. sets the undisplayed VFO fre-	Quick split ON	Quick split OFF
quency to the displayed VFO frequency plus the split
	(default)
offset and activates split operation.
See p. 92 for details.

9 SPLIT Offset

This item sets the offset (difference between transmit	0.000MHz	-9.999MHz
and receive frequencies) for the quick split function.	0.000 MHz offset	Minus 9.999 MHz offset
The offset frequency can be set from –9.999 MHz to	(default)
+9.999 MHz in 1 kHz steps.

10 SPLIT LOCK

When this item is ON, [DIAL] can be used to adjust	ON	OFF
the transmit frequency while pushing [XFC] even	Split lock function ON	Split lock function OFF
while the lock function is activated.
		(default)

See p. 91 for split frequency operation details.

11 DUP Offset HF

This item sets the offset (difference between transmit	0.100MHz
and receive frequencies) for duplex operation. How-	0.1 MHz offset (default)
ever, this setting is used to input the repeater offset
for an HF band only.
The offset frequency can be set from 0.000 MHz to
+9.999 MHz in 1 kHz steps.

12 DUP Offset 50M

This item sets the offset (difference between transmit	0.500MHz
and receive frequencies) for duplex operation. How-	0.5 MHz offset (default)
ever, this setting is used to input the repeater offset
for the 50 MHz band.
The offset frequency can be set from 0.000 MHz to
+9.999 MHz in 1 kHz steps.

131