Icom IC-7000 CW reverse mode, CW side tone function, Push ZMENU/GRP to exit the quick set mode

4RECEIVE AND TRANSMIT

DCW reverse mode

The CW-R (CW Reverse) mode receives CW signals on the reverse sideband like that of LSB and USB modes.

Use when interference is near the desired signal and you want to change the interference tone.

q Push [MODE] several times to select CW mode. w Push [MODE] for 1 sec. to select CW or CW-R

mode.

•Check the interference tone.

[MODE]

• Receive audio tone response

	600 Hz			Push		600 Hz
			for 1 sec.
inteference		BFO		inteference signal
signal						BFO
CW mode (LSB side)					CW-R mode (USB side)

DCW side tone function

When the transceiver is in receive condition (and the break-in function is OFF— p. 87) you can listen to the tone of your CW signal without actually transmitting.

This allows you to match your transmit signal exactly to another station’s. This also convenient for CW practice.

q When CW (CW-R) mode is selected, enter the quick set mode.

•Push [AF(SET)] momentarily to enter the set mode menu.

•Push [F-1QS] to enter the quick set mode.

w Push [F-1≤] or [F-2≥] several times to select “Side Tone Level,” then rotate [DIAL] to ad-

just the side tone level.

•Side tone level is adjusted in 1% steps (0% to 100%).

e Push [Z(MENU/GRP)] to exit the quick set mode.

•Push [Z(MENU/GRP)] again to return the normal oper- ating mode.

[AF]

[MENU/GRP] [F-1] [F-2] [DIAL]

43