Icom IC-7000 Voice Recorder Functions, Digital voice recorder, Recording a received audio

7VOICE RECORDER FUNCTIONS

■Digital voice recorder

The transceiver has digital voice memories, up to 4 channels for transmit, and up to 99 channels for re- ceive. A maximum message length of 120 sec. can be recorded into a receive channel (total message length for all channels of up to 1500 sec.), and a total mes- sage length of 90 sec. can be recorded in transmit channels.

Providing a transmission memory is very convenient for repeated CQ and number transmissions at contest times, as well as when making consecutive calls in DX’pedition.

Menu group selection

Push [MENU/GRP] for 1 sec.

Selection from: M, S or G(Graphic)

Menu selection (Example: S)

Push [MENU/GRP] momentarily.				Either
Selection from:	,	or		Y or Z
	S-1 S-2		S-3

■Recording a received audio

DBasic recording

q Select the desired frequency and mode. w Select S-1.

e Push [F-1VO] to call up the voice recorder menu.

•If the transmit voice memory channels (T1–T4) screen
appears, push [Z(MENU/GRP)] then push [F-1RX] to
select the receive voice memory channel.
•If the voice root menu appears, push [F-1RX] to select
the receive voice memory menu. The voice recorder
	[MENU/GRP] [F-1] [F-2] [ANF/•REC]
starting menu can be changed in the miscellaneous
(others) set mode.

r Push [F-1≤] or [F-2≥] to select the new truck or

desired recorded contents to be overwritten.

t Push and hold [ANF/• REC] for 1 sec. to start recording while receiving a signal.

•“” appears and the recording timer counts up. •The operating frequency, mode and current time are programmed as the memory names automatically. •Previously recorded contents are cleared, if overwrit- ten.

y Push and hold [ANF/• REC] for 1 sec. again to stop recording.

•“” disappears.

•Recording is automatically terminated after 120 sec. or when a total of the recorded time becomes 1500 sec.

u Push [Z(MENU/GRP)] twice to exit the voice recoder mode.

CONVENIENT

MIC Memo FUNCTION

While recordig a received audio, speak into micro- phone (without pushing [PTT]) to record your com- ment, impression or some information with recorded audio.

This function can be activate in the voice set mode.

(p. 101)The voice recoder stores the received audio in 15 sec. blocks. Thus the total recording time is re- duced by 15 sec. each time recording is stopped.

95