Additional information

Specifications

Amplifier section

Continuous average power output of 110 watts* per channel, min., at 8 ohms, from 20 Hz to 20,000 Hz with no more than 0.09%** total harmonic distortion (front).

Continuous Power Output

Front. . . . . . . . . . . . . 110 W + 110 W (20 Hz-20 kHz, 0.09%) Center . . . . . . . . . . . . . . . . . . . 110 W (20 Hz-20 kHz, 0.09%) Surround . . . . . . . . . 110 W + 110 W (20 Hz-20 kHz, 0.09%) Surround back . . . . 110 W + 110 W (20 Hz-20 kHz, 0.09%)

Audio Section

Input (Sensitivity/Impedance)

LINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335 mV/47 kΩ Frequency Response

LINE. . . . . . . . . . . . . . . . . . . . . .5 Hz to 100,000 Hz dB Output (Level/Impedance)

REC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335 mV/2.2 kΩ Tone Control

BASS . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (100 Hz) TREBLE . . . . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (10 kHz) LOUDNESS. . . . . . . . . . . . . . +4/+2 dB (100Hz/10 kHz)

(at volume position –40dB)

Signal-to-Noise Ratio (IHF, short circuited, A network) LINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 dB

Signal-to-Noise Ratio [EIA, at 1W (1kHz)]

LINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 dB

*Measured pursuant to the Federal Trade Commission’s Trade Regulation rule on Power Output Claims for Amplifiers

**Measured by Audio Spectrum Analyzer

12

Antenna Input . . . . . . . . . . . . . . . . . . . . . . 75 Ω unbalanced

AM Tuner Section

Frequency Range . . . . . . . . . . . . . . . . 530 kHz to 1,700 kHz Sensitivity (IHF, Loop antenna) . . . . . . . . . . . . . . . 350 µV/m Selectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 dB Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 50 dB Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loop antenna

Miscellaneous

Power Requirements. . . . . . . . . . . . . . . . . . .AC 120 V, 60 Hz Power Consumption . . . . . . . . . . . . . . . . . . . . 480 W, 630 VA In standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.43 W AC Outlet . . . . . . . . . . . . . . . . . . . . . (switched) 100 W MAX. Dimensions . . . . . . . . . . . . 420 (W) x 173 (H) x 465 (D) mm

(16 9/16 (W) x 6 13/16 (H) x 18 5/16 (D) in.) Weight (without package). . . . . . . . . . . . . . . . 15.4 kg (34 lb)

Furnished Parts

Microphone (for Auto MCACC setup) . . . . . . . . . . . . . . 1 Microphone stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 AA/LR6 dry cell batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FM wire antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 These operating instructions . . . . . . . . . . . . . . . . . . . . . . . . 1

Note

•Specifications and the design are subject to possible modifications without notice, due to improvements.

Composite Video / S-Video Section

Input (Sensitivity/Impedance) . . . . . . . . . . . . . . 1 Vp-p/75 Ω Output (Level/Impedance) . . . . . . . . . . . . . . . . . 1 Vp-p/75 Ω Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 65 dB Frequency Response . . . . . . . . . . . . . 5 Hz to 10 MHz dB

Component Video Section

Input (Sensitivity/Impedance) . . . . . . . . . . . . . . 1 Vp-p/75 Ω Output (Level/Impedance) . . . . . . . . . . . . . . . . . 1 Vp-p/75 Ω Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 65 dB Frequency Response . . . . . . . . . . . . . 5 Hz to 40 MHz dB

Cleaning the unit

•Use a polishing cloth or dry cloth to wipe off dust and dirt.

•When the surface is dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleansers.

•Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit, since these will corrode the surface.

FM Tuner Section

Frequency Range . . . . . . . . . . . . . . . . 87.5 MHz to 108 MHz Usable Sensitivity . . . . . . Mono: 13.2 dBf, IHF (1.3 µV/75 Ω) 50 dB Quieting Sensitivity . . . . . . . . . . . . . . Mono: 20.2 dBf Stereo: 38.6 dBf Signal-to-Noise Ratio . . . . . . . . . . . Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf)

Distortion . . . . . . . . . . . . . . . . . . . . . . . Stereo: 0.5% (1 kHz) Alternate Channel Selectivity . . . . . . . . . . . 60 dB (400 kHz) Stereo Separation . . . . . . . . . . . . . . . . . . . . . . 40 dB (1 kHz) Frequency Response . . . . . . . . . . . . 30 Hz to 15 kHz ± 1dB

73

En

Page 72 Page 74
Page 73
Image 73
Pioneer VSX-1014TX manual Additional information Specifications, Cleaning the unit
Page 72 Page 74

VSX-1014TX specifications

The Pioneer VSX-1014TX is a feature-rich AV receiver that has made a mark in the home theater market, thanks to its impressive performance and versatility. Designed for movie enthusiasts and music lovers alike, this receiver packs a punch with a wide array of technologies and features that enhance the audio and visual experience.

One of the standout features of the VSX-1014TX is its powerful amplification. With 100 watts per channel across seven channels, it delivers a robust performance that is capable of driving demanding speakers to their full potential. This ensures that every sound detail is reproduced with clarity, whether it's a quiet dialogue or the explosive sound effects of an action-packed film.

Equipped with Dolby Digital EX and DTS-ES decoding, the VSX-1014TX provides an immersive surround sound experience. It supports multiple audio formats, allowing users to enjoy high-quality audio from DVDs, Blu-rays, and streaming services. The receiver also features DTS Neo:6 and Pro Logic IIx, which can up-mix stereo content to impressive surround sound, giving new life to older music and movies.

Another significant feature is the inclusion of Pioneer's Multi-Channel Acoustic Calibration System (MCACC). This technology automatically analyzes the acoustics of the room and adjusts the receiver's settings accordingly. This means that whether you have a dedicated home theater or a simple living room setup, the VSX-1014TX ensures optimal sound quality tailored to your specific environment.

The connectivity options on the VSX-1014TX are extensive. It includes multiple HDMI inputs, component video inputs, and digital audio inputs, providing flexibility for various devices. The receiver is also compatible with high-definition audio formats, ensuring that users can enjoy the latest advancements in sound technology.

For added convenience, the VSX-1014TX features an intuitive on-screen display, making navigation through its settings straightforward. This, coupled with its customizable remote control, allows users to easily manage their home theater setup.

In summary, the Pioneer VSX-1014TX is an exceptional AV receiver that blends powerful performance with cutting-edge technology. Its robust amplification, immersive surround sound capabilities, intelligent calibration system, and extensive connectivity make it an ideal choice for anyone looking to elevate their audio-visual experience at home. Whether you're watching a movie or enjoying your favorite music, the VSX-1014TX is designed to deliver an engaging and high-quality experience.
Top Page Image Contents