Controls and displays | 04 |
Display
1 | 2 | 3 |
| 4 | 5 | 6 | 7 |
| 8 | 9 |
SIGNAL | DIGITAL | DIGITAL | L C | R LFE | PL Neo 6 THX |
| DVD TV | DVR | VIDEO1 | |
AUTO ANALOG | DTS | LS S | RS | ADV.SURR. VIR.SB |
| CD | VIDEO2 | |||
SP A B SLEEP | SR | AUTO SURR. MONO STEREO TUNED DE |
| MIDNIGHT LOUDNESS | ATT | |||||
|
|
|
|
|
|
|
|
|
| OVER dB |
16 | 15 | 6 | 14 | 13 | 12 | 11 | 10 |
1 Speaker indicators (page 56)
Lights to indicate the current speaker system, A and/or B.
2 SIGNAL SELECT indicators
Lights to indicate the type of input signal assigned for the current component:
AUTO
Lights when AUTO signal select is on.
DIGITAL
Lights when a digital audio signal is detected.
ANALOG
Lights when an analog signal is detected.
3Digital format indicators
2 DIGITAL
Lights when a Dolby Digital encoded signal is detected.
DTS
Lights when a DTS encoded signal is detected.
4Program format indicators
These change according to which channels are active in Dolby, DTS,
5Matrix decoding format indicators
2PLII
This lights to indicate Pro Logic II / Pro Logic IIx decoding (see Listening in surround sound on page 30 for more on this).
Neo:6
When one of the Neo:6 modes of the receiver is on, this lights to indicate Neo:6 processing (see Listening in surround sound on page 30 for more on this).
6Listening mode indicators
THX
Lights when one of the Home THX modes is selected.
VIR.SB
Lights during Virtual surround back processing.
ADV.SURR.
Lights when one of the Advanced Surround modes has been selected.
AUTO SURR.
Lights when the Auto Surround feature is switched on (see Auto playback on page 30).
LS, S and RS will light at the same time to indicate 6.1channel sources.
•L – Left front channel
•C – Center channel
•R – Right front channel
•LS – Left surround channel
•S – Surround channel (mono) or surround back channel
7 MIDNIGHT / LOUDNESS
When Midnight or Loudness listening is switched on, the corresponding indicator shows in the display.
8 Input source indicators
Light to indicate the input source you have selected.
9 ATT
Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal.
•RS – Right surround channel
•LFE – Low frequency effects channel
10 OVER
Lights to indicate that the level of an analog source is too high. Use the attenuator (INPUT ATT) to reduce it.
11 Master volume level
Shows the overall volume level.
25
En