03Connecting up
| Power cord caution |
| Handle the power cord by the plug. Do not pull out the |
| plug by tugging the cord and never touch the power cord |
| when your hands are wet as this could cause a short |
| circuit or an electric shock. Do not place the unit, a piece |
| of furniture, etc., on the power cord, or pinch the cord. |
| Never make a knot in the cord or tie it with other cords. |
| The power cords should be routed such that they are not |
| likely to be stepped on. A damaged power cord can cause |
| a fire or give you an electrical shock. Check the power |
| cord once in a while. When you find it damaged, ask your |
| nearest Pioneer authorized independent service |
| company for a replacement. |
AC outlet
Power supplied through this outlet is turned on and off by the receiver's power switch. Total electrical power consumption of connected equipment should not exceed 100 W (0.8 A).
| AC OUTLET |
|
| AC 120V 60Hz |
|
| SWITCHED 100W(0 .8A) MAX | |
ND L | SURROUND BACK / B | L(Single) |
| R | |
| SELECTABLE |
|
| SELECTABLE |
|
Operating other Pioneer components
Many Pioneer components have SR CONTROL jacks which can be used to link components together so that you can use just the remote sensor of one component. When you use a remote control, the control signal is passed along the chain to the appropriate component.
Note that if you use this feature, make sure that you also have at least one set of analog audio or video jacks connected to another component for grounding purposes.
|
| CONTROL |
IN | OUT | IN |
| CONTROL | |
|
| |
|
| OUT |
Receiver
Caution
•Do not connect a TV set, monitor, heater, or similar appliance to this unit's AC outlet.
•Do not connect appliances with high power consumption to the AC outlet in order to avoid overheating and fire risk. This can also cause the receiver to malfunction.
•Since a subwoofer or power amplifier can exceed the 100W maximum when playing sources at a high volume, this type of equipment should not be connected to the AC outlet.
Note
•This unit should be disconnected by removing the power plug from the wall socket when not in regular use (ex. when on vacation).
| Other Pioneer products |
Remote | with CONTROL terminals |
control | Connect to CONTROL |
unit | |
| terminal of other |
| Pioneer products |
Note
•If you want to control all your components using this receiver’s remote control, refer to Controlling the rest of your system on page 50.
•If you have connected a remote control to the CONTROL IN jack (using a
22
En