Pioneer VSX-1014TX manual Other Settings, Other Setup menu, Assigning the component video inputs

Other Settings

Assigning the component video inputs

•Default settings: Component 1 – OFF

Component 2 – OFF

If you used component video cords to connect your video equipment you must tell the receiver which device it is, or else you may see the S-video or composite video input instead of the component video signal. For more on this, see About the video converter on page 15.

1Select ‘Component Input’ from the Input Assign menu.

5.	Input Assign
[	a. Digital Input	]
[	b. Component Input	]

2Select the number of the component video input to which you’ve connected your video component. Select between DVD/LD, TV/SAT, DVR, VIDEO1 or OFF.

5b. Component Input

Component-1 [ DVD/LD ]

Component-2 [ OFF ]

•The numbers correspond with the numbers beside the inputs on the back of the receiver.

3Select the component that corresponds with the one you connected to that input.

• Use the	(cursor left/right) buttons and ENTER
to do this.

•Make sure you have connected the audio from the component to the corresponding inputs on the rear of the receiver.

•If you connect any source component to the receiver using a component video input, you should also have your TV connected to this receiver's component video MONITOR output.

4When you're finished, press RETURN. You will return to the Input Assign menu.

11

The Other Setup menu

The Other Setup menu is where you can make customized settings to reflect how you are using the receiver.

RECEIVER	INPUT	SOURCE
	SELECT

DVD/LD TV/SAT DVR/VCR TV CONT

MULTI CONTROL

CD CD-R/TAPE TUNER RECEIVER

INPUT ATT		FL DIMMER		SR
	+10			DISC
				ENTER
D.ACCESS				CLASS
TOP MENU				MENU
		TUNE
DTV MENU	ST	ENTER		ST
T.EDIT				BAND
SYSTEM		TUNE
GUIDE SETUP		TV CONTROL		RETURN
TVVOL		INPUT	TV CH	VOL
		SELECT
DTVON/OFF		REC	DTVINFO	MUTE
TUNER			RECSTOP
DISPLAY
MPX	CHRETURN		HDD	DVD
AUDIO		SUBTITLE

1Switch on the receiver and your TV. Use the RECEIVER button to switch on.

2Press RECEIVER on the remote control, then press the SYSTEM SETUP button.

An on-screen display (OSD) appears on your TV. Use the buttons and ENTER on the remote control to

navigate through the screens and select menu items. Press RETURN to confirm and exit the current menu.

3Select ‘Other Setup’ then press ENTER.

System Setup

[ 1. Surr			Back System	]
[ 2. AUTO			MCACC	]
[ 3.		MANUAL MCACC		]
[ 4.		Manual SP Setup		]
[ 5.		Input	Assign	]
[	6.	Other	Setup	]

Enter : Select

Return : Exit

61

En