Panasonic AWHE60HE, AWHE60SN  OSD Menu Operation,  Camera button / Color bar button CAM/BAR

Controls and settings from web screen (continued)

OSD Menu Operation

Use this to select whether the camera’s on-screen displays are to be shown.

It cancels the selection of the setting which is being changed.

It restores the pre-change setting.

Use these to perform the menu operations. The items are selected using the , , and buttons.

If a selected item has a sub menu, this sub menu is displayed by pressing the button.

When the cursor is moved to any item on the bottom-level setting screen and the button is pressed, the setting of the selected item starts flashing.

A setting for a regular menu item is reflected immediately if it is changed while it is still flashing. However, there are a number of menu items (Scene, Format and Initialize) whose setting is reflected only

after the button has been pressed, causing the setting to stop flashing and the new setting to be entered.

Camera button / Color bar button (CAM/BAR)

Use this to output the camera pictures.

Use this to output the color bar signals.

Power ON button / Standby button

The unit’s power is turned on when the Power ON button is pressed.

When the Standby button is pressed, the unit is set to the standby mode.

While the standby mode is established, the control over the camera’s operations exercised on the Control screen, the Image button and Maintenance button on the Setup screen is disabled.

Notes

ppIf Power ON or Standby is selected too quickly, the status selected and the display shown may not correspond.

In a case like this, follow the steps below to restore the correct status display:

[When using Windows]

Press the [F5] key on the keyboard of the personal computer.

[When using Mac OS X]

Press the [Command] + [R] keys on the keyboard of the personal computer.

ppWhen operation is transferred to the STANDBY mode: The current zoom, focus and iris positions are stored in the memory (POWER ON preset).

ppWhen operation is transferred to the POWER ON mode: The zoom, focus and iris are transferred to the positions which were stored in the memory (POWER ON preset) when operation was transferred to the STANDBY mode.

Operation lock button (Op.Lock)

Use this to lock the operation of the pan, tilt, zoom, focus, brightness, speed, preset and scene operations on the control screen.

Use this also to lock the on-screen display menu operations, CAM/BAR and Power ON button/Standby button to prevent operations from being performed by accident.

59