Panasonic AWHE60HN, AWHE60SN, AWHE60SE manual Genlock adjustment AW‑HE60S only, WwGenlock adjustment

Genlock adjustment (AW‑HE60S only)

wwGenlock adjustment

The genlock adjustment is performed to achieve phase alignment by applying external synchronization (genlock) when a multiple number of cameras will be used or when the unit will be used in combination with other devices.

This unit supports the BBS signal as the genlock signal. Ask your dealer to perform this adjustment.

(Use a dual-trace oscilloscope for the adjustment.)

(The genlock function is not available with the AW‑HE60H.)

qqHorizontal phase adjustment

Observe the waveforms of the external sync signal input (black burst signal) and video signal output on the dual‑trace oscilloscope, and use the wireless remote control or controller to bring the horizontal phase into alignment.

External sync signal input (black burst signal)

Video signal output

Bring the horizontal phase into alignment.

When performing the operations using the wireless remote control

1Follow the operation steps in “Basic operations” (page 34) to display the Top Menu.

2Press the [] or [] button to bring the cursor to “System”.

Top	Menu
Camera	Scene: FullAuto
System

Maintenance

3Press the [] button.

The “System” sub‑menu is displayed.

System

Genlock

Output

Other

Return

4Press the [] or [] button to bring the cursor to “Genlock”, and press the [] button.

The “Genlock” sub‑menu is displayed.

Genlock
Horizontal	Phase	0
Subcarrier	Phase
Coarse		90°
Fine		0
H Phase.SC	Fine Step	1

Return

5Press the [] or [] button to bring the cursor to “Horizontal Phase”, and press the [] button.

The “Horizontal Phase” value starts blinking.

6Press the [] or [] button to change the “Horizontal Phase” value, adjust the value so that the horizontal phase is brought into alignment, and press the [] button.

7Press the [MENU] button for 2 seconds.

The camera menu display is exited.

When performing the operations using the controller

These operations can be performed using the camera menus by following the operation steps in “Basic operations” (pages 32 to 39).

29