Panasonic AWHE60SE, AWHE60SN, AWHE60HN Genlock adjustment AW‑HE60S only, QqColor phase adjustment

Genlock adjustment (AW‑HE60S only) (continued)

qqColor phase adjustment

The color phase adjustment must be performed if the pictures are to be switched using a video switcher or other device when the video output signals have been set as composite signals.

It need not be performed when the video output signals have been set as component signals.

The camera’s color phase is aligned with the program output (split color bar output) signals of a color special effect device or other color tones that will serve as the reference.

(The color phase can be adjusted more accurately if a vectorscope is used for the adjustment.)

Color bar of camera

Split line

Color bar of special effects generator

When performing the operations using the wireless remote control

1Press the [MODE] button.

The mode is switched to the color bar display.

2Follow the operation steps in “Basic operations” (page 34) to display the Top Menu.

3Press the [] or [] button to bring the cursor to “System”.

Top	Menu
Camera	Scene: FullAuto
System

Maintenance

4Press the [] button.

The “System” sub‑menu is displayed.

System

Genlock

Output

Other

Return

5Press the [] or [] button to bring the cursor to “Genlock”, and press the [] button.

The “Genlock” sub‑menu is displayed.

Genlock
Horizontal	Phase	0
Subcarrier	Phase
Coarse		90°
Fine		0
H Phase.SC	Fine Step	1

Return

6Press the [] or [] button to bring the cursor to “Coarse” or “Fine” of “Subcarrier Phase”, and press the [] button.

The “Coarse” or “Fine” value starts blinking.

7Press the [] or [] button to change the “Coarse” or “Fine” value of “Subcarrier Phase”, adjust the value so that the color phase is brought into alignment, and press the [] button.

8Press the [MENU] button for 2 seconds.

The menu display is exited.

9Press the [MODE] button.

The mode is switched to the camera picture display.

30