Controls and settings from web screen (continued)

SNMP screen

The settings related to the SNMP function are selected on this screen.

When the SNMP manager is used for the connection, the unit’s statuses can be checked. When the SNMP function is to be used, consult with your network administrator.

Community [0 to 32 half-size characters]

<Initial setting: blank>

Input here the community name which is to be monitored.

Note

ppWhen using the SNMP function, be absolutely sure to input the community name.

This function cannot be used if the community name field is left blank.

System name [0 to 32 half-size characters]

<Initial setting: blank>

Input here the system name for controlling the unit using the SNMP function.

Location [0 to 32 half-size characters]

<Initial setting: blank>

Input here the location where the unit has been installed.

Contact [0 to 255 half-size characters]

<Initial setting: blank>

Input here the email address or telephone number of the administrator.

90

Page 90
Image 90
Panasonic AWHE60SE manual Snmp screen,  Community 0 to 32 half-size characters,  System name 0 to 32 half-size characters