Basic operations (continued)

qqProcedure for camera menu operation (AWRP555)

1Press one of the [1] to [5] buttons of [CONTROL] to select the unit which is to be operated.

2Press the [MENU] button of the AWRP555 for 2 seconds.

The camera menu of the AWHE60 is displayed on the monitor.

3Perform one of the following steps to select the menu item.

If the [YES] button is pressed, the selection item moves up; if the [NO] button is pressed, it moves down.

4Press the [ITEM] button.

The value of the item to be set starts blinking.

5Press the [YES] or [NO] button to change the setting.

6After deciding on the setting, press the [ITEM] button.

The value of the item to be set is entered, and it stops blinking.

7Press the [MENU] button for 2 seconds to exit the camera menu.

Note

ppIt may be necessary to upgrade the software version in order to operate an AWHE60 from an AWRP555. Ask your dealer for details.

38

Page 38
Image 38
Panasonic AWHE60SE, AWHE60SN, AWHE60HN, AWHE60HE manual QqProcedure for camera menu operation AW‑RP555, Press the Item button