Dell P190S, P170s Monitor Specifications, Power Management Modes, Pin Assignments, VGA Connector

Dell P170S/P190S Flat Panel Monitor User's Guide

5USB upstream connector

6USB connector

Connect the USB cable that came with your monitor to the monitor and the computer. Once this cable is connected you can use the USB connectors on the side and bottom of the monitor.

Connect your USB devices.

Monitor Specifications

Power Management Modes

If you have VESA's DPMS™ compliance display card or software installed in your computer, the monitor can automatically reduce its power consumption when not in use. This is referred to as Power Save Mode. If input from a keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power-saving feature:

P170S

VESA Modes	Horizontal	Vertical Sync	Video	Power		Power Consumption
	Sync			Indicator
Normal operation	Active	Active	Active	Green	50	W (maximum)
					22	W (typical)
Active-off mode	Inactive	Inactive	Blanked	Amber	Less than 1 W
Switch off	-	-	-	Off	Less than 1 W
P190S

VESA Modes	Horizontal	Vertical Sync	Video	Power		Power Consumption
	Sync			Indicator
Normal operation	Active	Active	Active	Green	53	W (maximum)
					25	W (typical)
Active-off mode	Inactive	Inactive	Blanked	Amber	Less than 1 W
Switch off	-	-	-	Off	Less than 1 W

NOTE: This monitor is ENERGY STAR®-compliant as well as TCO '03 power management compatible.

NOTE: Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

Pin Assignments

VGA Connector

Pin Number	15-pin Side of the Connected Signal
	Cable
1	Video-Red
2	Video-Green
3	Video-Blue
4	GND
5	Self-test
6	GND-R
7	GND-G
8	GND-B

file:///S/SSA_Proposal/P170S_P190S/UG/about.htm[7/8/2011 4:49:51 PM]