SPECIFICATIONS

Viper model 550.6

RMS continuous power per channel, Channels 1-4 driven into 4 ohms from 20 to 20,000 Hz, with less than 0.08% total Harmonic Distortion @ 14.4 VDC. Channel 5-6 driven into 4 ohms from 20-250 Hz, with less than 0.08% THD @ 14.4 VDC.

RMS continuous power per channel, Channels 1-4 driven into 2 ohms from 20 to 20,000 Hz, with less than 0.1% Total Harmonic Distortion @ 14.4 VDC. Channel 5-6 driven into 2 ohms from 20-250 Hz, with less than 0.1% THD @ 14.4 VDC.

RMS continuous power, 3-channel operation, channels 1- 4 bridged into 4 ohms from 20 to 20,000 Hz, with less than 0.1% Total Harmonic Distortion @ 14.4 VDC. Channel 5-6 bridged into 4 ohms from 20-250 Hz, with less than 0.1% THD @ 14.4 VDC.

Dynamic power rating (IHF-202 Standard) at minimum loadSignal-to-Noise RatioFrequency ResponseDamping Factor @ 4 ohmCrossoversBass Equalization (Ch 5-6)Input ImpedanceInput SensitivityOutput Impedance (ch 1-6)

Supply Voltage Fusing and Power

Minimum Cable Requirements (AWG) (Per amp, trunk mounted)

Ch 1-4 Ch 5-6

50

75

watts

watts

75125

watts watts

150x2 250

watts watts

700 wattsGreater than 95 dB

20-20,000 Hz ± 0.5 dB Greater than 100

Switchable high or low pass

12 dB/octave, continuously variable 50 to 500 Hz

Variable, centered at 40Hz 20K ohmsVariable from 150 mV to 8 volt2 to 8 ohms, stereo4 to 8 ohms, bridged10 to 16 VDC60A

#8

© 2002 Directed Electronics, Inc

15