Panasonic AWHE60SE, AWHE60SN, AWHE60HN, AWHE60HE manual  Priority stream Activation, Stream type

Controls and settings from web screen (continued)

Priority stream

Selected on this screen are the settings for the priority stream which enables the images to be sent with no reduction in image quality or image refresh speed even when a multiple number of users are accessing the unit at the same time.

Priority stream

Activation

<Initial setting: Off>

Whether to use priority stream transmission is set here using “On” or “Off.”

Stream type

<Initial setting: JPEG>

JPEG or H.264 is set as the stream type here.

JPEG JPEG images are sent.

H.264 H.264 images are sent.

Note

ppIf “On” has been selected as the priority stream “Activation” setting, the number of users who are allowed access may be limited.

Destination IP address(1) <Initial setting: blank>

The IP address of the first send destination is input here.

Destination IP address(2) <Initial setting: blank>

The IP address of the second send destination is input here.

Refresh interval*

[1fps, 2fps, 3fps, 5fps, 6fps, 10fps, 15fps*, 30fps*]

<Initial setting: 1fps>

The speed at which the images are to be refreshed is set here. This setting takes effect only when “JPEG” has been selected as the “Stream type” setting.

Note

ppWhen “On” is selected as the “H.264 transmission” (page 67) and a value with an asterisk (*) is selected, the image refresh interval may become longer than the value which is set.

Image capture size [QVGA, VGA] <Initial setting: VGA>

QVGA or VGA is selected here as the image resolution. This setting takes effect only when “JPEG” has been selected as the “Stream type” setting.

86