Lindy 32416 manual Port Configuration, Label, After Power Up switch, Delay

5. PORT CONFIGURATION

The ports can be selected individually from the roll-up menu at the configuration site. The following settings can be modified for each port:

Label

A name with a maximum of 15 characters can be entered here.

After Power Up switch

The ports state after a restart of the IPower Control can be defined here (on, off, last state)

Delay

A delay for the following port can be chosen here. That is, in case of a restart the following port will be switched after the chosen delay (1-30 sec). E.g. a delay of 5 seconds for port 2 means that port 3 will be switched 5 seconds after port 2.