3Com MSR 30, MSR 50 manual Qos map-table dot1p-Ip, Import, Syntax qos map-table dot1p-lp

1840 CHAPTER 118: PRIORITY MAPPING TABLE CONFIGURATION COMMANDS

qos map-table dot1p-Ip

Syntax qos map-table dot1p-lp

View System view

Parameters dot1p-lp: Mapping table of 802.1p priority to local priority.

Description Use the qos map-tablecommand to enter the specified priority mapping table view.

Related commands: display qos map-table.

Examples # Enter the mapping table view from 802.1p priority to local priority.

<Sysname> system-view

[Sysname]qos map-table dot1p-lp

[Sysname-maptbl-dot1p-lp]

import

Syntax import import-value-list export export-value undo import { import-value-list all }

View Priority mapping table view

Parameters import-value-list: Maps input parameter list.

export-value: Maps export parameters.

all: Deletes all parameters in this mapping table.

Description Use the import command to configure the parameters in the specified priority mapping table to define a mapping rule or a group of mapping rules.

Use the undo import command to delete the mapping entries corresponding to specified mapping index. The deleted entries are restored to default value.

The default value is shown in the following table:

Table 488 Parameters in the default mapping table

802.1p priority	Local priority
0	2
1	0
2	1
3	3