Winegard TN2300-DV setup guide To set *86 as the default voicemail number, Restore User Defaults

To set *86 as the default voicemail number:

• From Configuration Mode, press

.

To set #86 as the default voicemail number:

• From Configuration Mode, press

.

Restore User Defaults

To restore your TN2300-DV SERIES to its default settings after changing configuration settings:

• From Configuration Mode, press <0 or

1> , where

0 = Keep Current Settings and 1 = Restore to Default Settings.

To access your voicemail, you will have to use the Direct Dial method of voicemail retrieval (see above

For information about your voicemail service, please contact your service provider.

The voicemail settings for your TN2300-DV SERIES should have been configured prior to purchase. The instructions for Voicemail Number and One- Touch Voicemail Retrieval are mainly for your reference.

Using Additional Hardware Devices

Using an External Answering Machine

The TN2300-DV SERIES can be used with an external answering machine in place of voicemail. If you plan to use an external answering machine, be sure your service provider has not activated voicemail on your account

Setting Up Data Transfer for a Digital Video Recorder (DVR) or Satellite Receiver

The TN2300-DV SERIES can be configured to dial out over your phone line so that a Digital Video Recorder (DVR) or a satellite receiver can send and receive the data required for its operation. Your DVR or satellite receiver must also be configured to tell the TN2300-DV SERIES that it needs to send data. You must

insert the prefix before the phone number that the DVR or satellite receiver dials. Consult your DVR or satellite receiver manual or provider if you need further assistance with this feature.

Ver. 1.6
8/3/2009	- 10 -