2.Listen for a dial tone. (If you hear a No Service tone [fast beeping], hang up and try again. If the No Service tone continues, contact your service provider to verify that cellular service is available.)
3.Dial a phone number. (When you have finished dialing, the call will be sent automatically.)
TIP:
Pressing the Flash key or pressing and releasing the
Receiving Calls
•When the telephone rings, pick up the handset and begin talking.
Ending Calls
•When you are finished with a call, hang up the phone by placing the handset back on the telephone cradle or by pressing the Off or End button.
Using
To place a call on hold:
•During a call, press the Flash key on your handset (if your phone doesn’t have a Flash key, press and release the
· If you hang up your phone when a call is on hold, the call will be disconnected.
To retrieve a call on hold:
•Press the Flash key on your phone (or press and release the
To answer a call waiting call:
•When you’re on an active call and a new incoming call arrives, you will hear a short tone on your phone. To place the current call on hold and answer the incoming call, press the Flash key on your phone (or press and release the
To answer a call when you are dialing or with the phone off the hook:
•If a call comes in while you are dialing or when you have the phone off the hook, you will hear a call waiting tone on your phone. To answer the incoming call, press the Flash key on your phone (or press and release the
Call Hold and Call Waiting are not available with all service providers. These services may not be available if you are using your
Pressing the Flash key or pressing and releasing the
Accessing Your Voicemail
To access your voicemail using
• Press and hold the 
button on any home phone for two seconds.
To access your voicemail using Direct Dial:
Ver. 1.6
8/3/2009 | - 3 - |
