Winegard TN2300-DV setup guide To set your phone’s TTY mode, To set the default voicemail number

To set your phone’s TTY mode:

•From Configuration Mode, press <0 or 3> , where <0 or 3> are as follows:

0 = TTY Off

3 = TTYAlways

To turn on the TTY Mode, use User Interface and turn the TTY feature on. Or optionally the TTY Mode can be turned on via the POTS command with a phone is:

# * 0 * 12344321 #

# * 139 * <parameter > #

Parameters:

0 – TTY off

1 – TTY VCO

2 – TTY HCO

3 – TTY only

Voice Carry Over (VCO): The next most common call type is Voice Carry Over (VCO). VCO allows a person who is Hard–of–Hearing or Deaf and does speak to use one's voice while receiving responses from a person who is Hearing via the operator's typed text.

Hearing Carry Over (HCO): A less common call type is Hearing Carry Over (HCO). HCO allows a person who is Speech–Disabled and can hear to use one's hearing while sending responses to a person who is Hearing via the HCO user's typed text. The operator voices the HCO user's typed messages, and then the HCO users picks up the handset and listens to the other voice user's response.

Voicemail Number

You can use Configuration Mode to set the default voicemail number for your TN2300-DV SERIES.

To set the default voicemail number:

• From Configuration Mode, press <voicemail

number> .

For example, to set 555-123-4567 as your voicemail number, you would press

.

If your voicemail access number includes a special character, such as an asterisk (*) or a pound sign (#), you can program it by adding an extra asterisk in front of the special character. Please refer to the examples below:

Ver. 1.6
8/3/2009	- 9 -