Direct Connection Phone | Winegard TN2300-DV instruction

TravelNet Data/Voice Cellular Router Phone Setup Guide

Direct Connection: Phone

Connect a phone to your TN2300-DV SERIES’ phone (RJ11) jacks using a standard telephone cord-

Figure 1

Connection via Wall Jacks

If you do not have local phone service, you may use your TN2300-DV SERIES to provide a connection to your wireless service for devices that are plugged into your wall jacks.

1.Connect either of your TN2300-DV SERIES’ phone (RJ11) jacks to any wall jack using a standard telephone cord -

Ver. 1.6
8/3/2009	- 1 -

Page 1

Image 1

Winegard TN2300-DV setup guide Direct Connection Phone, Connection via Wall Jacks

Contents

Connection via Wall Jacks Direct Connection Phone Making Calls Using the TN2300-DV SeriesTo make a call To place a call on hold To access your voicemail using Direct DialTo retrieve a call on hold To answer a call waiting call To decrease the phone’s volume level To increase the phone’s volume levelTo make a three-way call To change the Lock Code To enter Configuration Mode To change the auto-send delay To adjust your phone system’s audio line levelTo enable Zero Delay Dialing default setting To disable Zero Delay Dialing To set the Call Restrict level To disable Call Barring default settingTo set the Call Restrict table entries To enable the Hotline feature To disable Dial Tone After Remote DisconnectTo disable the Hotline feature default setting To enable One-Minute Alerts To set the default voicemail number To set your phone’s TTY mode To set #86 as the default voicemail number To set *86 as the default voicemail numberRestore User Defaults = Keep Current Settings and 1 = Restore to Default Settings To receive a fax 1-time fax mode To send a fax 1-time fax modeTo set your device to Always fax mode To make one voice call while in Always fax mode