![](/images/new-backgrounds/1255041/25504137x1.webp)
Door and rubber collar
Regularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass door.
Clean the glass in the door and the rubber collar regularly.
What to do if...
Remedying small faults yourself
If during use of the appliance one of the following error codes is shown in the
–E10 (Problems with the water inflow),
–E20 (Problems with the water outflow),
–E40 (door open),
please consult the following table.
After the error has been remedied, press the START/PAUSE button.
In the event of other errors (E and a number or letter): Switch the ap- pliance off and then on again. Set the programme again. Press the START/PAUSE button.
If the error appears again, please contact your local Service Force Cen- tre, stating the error code.
Problem | Possible cause | Remedy | |
| Mains plug not plugged in | Connect the plug to a mains | |
| or fuse not working. | socket. Check fuse. | |
Washing machine is not | Loading door not closed | Close loading door - there | |
properly. | should be an audible click. | ||
working. |
|
| |
| The START/PAUSE button | Press the START/PAUSE for a | |
| has not been pressed for | ||
| longer period of time. | ||
| long enough. | ||
|
| ||
|
|
| |
The door cannot be | The child safety device has | Deactivate the child safety | |
closed. | been activated. | device. | |
When a button is | The selected function | Select another function. | |
pressed, Err appears in | cannot be combined with | ||
the | the programme set. |
| |
E40 appears. |
|
| |
The END indicator | The door is not closed | Close the door properly. | |
flashes 4x, and an | |||
properly. | Restart the programme. | ||
acoustic signal sounds | |||
|
| ||
4x. |
|
| |
|
|
|
19