La Crosse Technology WS-7138U Program Mode, Programming Sequence and Default Settings

seconds, and reinstall making sure to install batteries into the remote temperature/humidity sensor first.

PROGRAM MODE

Programming Note: If 30 seconds is allowed to pass, or the IN/OUT, SET/CH button is pressed during the programming mode, the unit will confirm/set the last information entered—the display will stop flashing and return to normal time-date readings. If you don’t leave the program mode during the programming of sections IV through VI, you can advance to step 4 of the next program setting. If you do leave the program setting (or want to program a specific setting) follow each instructional step to program that setting.

I.PROGRAMMING SEQUENCE AND DEFAULT SETTINGS

The programming sequence and default (factory) settings are as follows:

Temperature Format	°F
12/24-hour time	12
Time	12:00
Year	2003
Date and Month	1.1.

6