La Crosse Technology WS-7138U Mounting Using the Stand, II. the Indoor Weather Station

5.Position the remote temperature/humidity sensor in the desired location, ensuring that the indoor weather station can receive the signal.

C.MOUNTING USING THE STAND

The mounting bracket can be used as a stand by simply attaching the bracket to the bottom of the temperature/ humidity sensor. Once snapped in place the sensor can then be placed on a shelf, table or other surface where the temperature and humidity measurements are desired.

II.THE INDOOR WEATHER STATION

The indoor weather station can be mounted in two ways:

•with the table stand

•on the wall with the use of a wall hanging screw (not included).

A.USING THE TABLE STAND

The indoor weather station comes with the table stand already mounted. If you wish to use the table-stand all that is required is to place the indoor weather station in an appropriate location.

B.WALL MOUNTING

1.Remove the table-stand. To do this, pull down on the stand from the rear and rotate forward.

2.Fix a screw (not included) into the desired wall, leaving approximately 3/16 of an inch (5mm) extended from the wall.

3.Place the indoor weather station onto the screw using the hanging hole on the backside.

19