humidity reading in the temperature/ humidity portion of the LCD within 4 minutes of setting up.
I. THE REMOTE TEMPERATURE/HUMIDITY SENSOR
The remote temperature/humidity sensor can be mounted in three ways:
•Mounting with screws
•Mounting with adhesive tape
•Using the bracket as a stand
A.MOUNTING WITH SCREWS
1.Remove the mounting bracket from the remote temperature/humidity sensor.
2.Place the mounting bracket over the desired location.
3.Through the screw holes of the bracket, mark the mounting surface with a pencil.
4.Screw mounting bracket onto the mounting surface. Ensure that the screws are flush with the bracket.
5.Insert the remote temperature/humidity sensor into the bracket.
B.MOUNTING WITH ADHESIVE TAPE
1.With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting surface should be smooth and flat.
2.Remove the protective strip from one side of the tape.
3.Adhere the tape to the designated area on the back of the mounting bracket.
4.Remove the protective strip from the other side of the tape.
18
