Best K30 manual Install the Hood, Wiring

INSTALL THE HOOD

1.Hang the hood from the brackets through the rectangular cut-outson the back of the hood.

Cut-outs are larger than the brackets to allow for horizontal adjustment.

The bottom of the hood should be 24" to 30" above the cooking surface.

2.Height adjustment screws provide vertical adjustment.

3.Depth adjustment screws provide hori- zontal adjustment.

4.Secure the hood with mounting screws (4.8x38mm).

Use drywall anchors, provided, if wall studs or framing are not available.

RECTANGULAR

CUTOUTS

MOUNTING

BRACKETS

MOUNTING

SCREWSWALL

(4.8x38mm)FRAMING

DEPTH ADJUSTMENT

HEIGHTSCREWS ADJUSTMENT

SCREWS

MOUNTING SCREWS

(4.8x38mm)

WIRING
Note: This range hood must be properly
grounded. The unit should be installed by a
qualified electrician in accordance with all
applicable national and local electrical	33-7/16”
codes.	(85cm)
GROUNDING INSTRUCTIONS	max
This appliance must be grounded. In the event
of an electrical short circuit, grounding
reduces the risk of electric shock by providing
an escape wire for the electric current. This
appliance is equipped with a cord having a
grounding wire with a grounding plug. The
plug must be plugged into an outlet that is
properly installed and grounded.
WARNING - Improper grounding can result in
a risk of electric shock.

Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician install an outlet near the appliance.

Set the electrical power supply within the space covered by the decorative flues.

Position the power socket at a maximum distance of 33-7/16” (85 cm) from where the lead exits from the hood (see illustration alongside). Make sure this does not interfere with the decorative flue (where the flue touches the wall).

Fit the plug into the power socket.

- 6 -